Sunday, June 30, 2024
Wednesday, June 19, 2024
Trailer Picts
Loaded with Ramps and 10X10 Tent
The Framework for the Ramps and tent
Typical underside. I used the existing holes in the framework and 1/4 20 flat-headed bolts to secure boards
Typical screw in boards.
I cut the front ones to the length of the trailer. I left the rear ones about 18 inches longer than the framework
When I put the wheelchock in, I had to put it far enough forward to get about 100 lbs on the tongue. That is why it is so far forward.
The Pitbull TRS is mounted with the bolts it came with but I put some really big fender washers under the nuts on the bottom.
Subscribe to:
Posts (Atom)