6 Weeks out from AC and CC Reconstructive Surgery

I went to my 6 week check in after surgery and while the doctor was happy with the progress I've made he does not want me on the velodrome yet.  He said that was more of a 3 month thing.

First thing is that after viewing the X-rays, I have not stretched the grafts at all and my collarbone is still in the correct position.

Next, he answered my question about how to determine healing time and how much scar tissue has grown over the grafts.  There will not be images to look directly at the scar tissue, they expect so much tissue to grow over a specific time and X-rays will show if my collarbone is still in the correct position.

I am now allowed to get a flu and/or Covid vaccine.

Swimming and Running are not in the schedule yet and won't be until at least week 10.

I rode 200 miles on Zwift last week.  I moved on from the 6X5's to :30/:15 because I didn't think it's what I need right now but then any sort of riding is probably good for the level of fitness I'm in at the moment.  The plan is to complete 3 weeks of the short HIT intervals, reevaluate and likely complete 3 more weeks of them.  That will take me to 11 weeks out where I expect to be able to ride the track the following week.

I'll probably take an easier week by then adjusting to the track...I don't know...I'm just speculating.

My weight has remained stable at 152 and has not gone down.  I stopped paying attention to it and will start again.  I would really like to be under 150 by the end of the year.

I am still not taking any medications.

My flexibility is doing well.  I still have a problem with strength in my left should and cannot do the zipper drill for swimming.  I mentioned it to my PT and he's going to address it so when I get back in the pool I'll be able to swim effectively.

I rarely wear my sling now, not even while sleeping.  It started with me being lazy and not getting my sling out of my car but has moved to me trying to sleep with my left arm behind me while lying on my right side.  I'm hoping it will make it easier to rotate my arm behind me which causes me a little bit of pain.

5 Weeks from AC Reconstruction Surgery

 Like last week I'm doing better but didn't have the big leap as I did before.

My shoulder is stronger and I'm less afraid of pulling things apart but I still don't have the flexibility to swim yet, nor the permission.  Along with doing some PT homework I tried doing the zipper drill and cannot do it along my body, I have to do it slightly if front of me so I don't have the tight rotation on my recovery.

I'm no where near ready to swim or run yet.

I failed in my quest to finish 3 weeks of 6X5(5) on the bike so I let it go.  I'm just not strong enough to do it 3 times a week yet.  I could definitely do 2 times but not 3 yet.  I may move on to something else like some VO2max work but only twice a week.  I'm not sure.

I did 165 miles on the trainer last week which is more of a normal week for me.  I don't think I could handle any more.  I had some thoughts about doing a 1000 mile month in December then thought it would be better for me to use December to lead into a 1000 mile January.  It's just too early to stress it and I'm not time constrained.  When I get on the track again it won't be so boring to ride.  Zwift is helping but I really don't like it as much.

My weight came down a little but I let it go a bit over Thanksgiving.  I was in the low 152's, now I'm back to 153's.  I had been as low as 151.4 and saw some 150's after workouts.

I saw a different PT today and he did a few different things than the normal one I was seeing.  He concentrated on the muscle knots in my shoulder and a little less on strength.  It wasn't better, just different.

Next Monday I have another doctor appointment.  I'm hoping to get the OK to ride at the Velodrome but I'm not optimistic.

I am still not taking any medications for pain.

While I don't wear my sling most of the time, I do like to wear it while sleeping.  Letting my arm lie in front of me doesn't feel good in the morning.  I tried it again last week with the same poor results.  I am using my left hand a little while on the bike trainer right now but not a lot.  I am actively trying to not use it most of the time.

I started work last week.  Things are pretty calm, there were no really big issues while I was gone.  One test stand is down for a drive controller problem, the vendor I contacted for repair hadn't returned my call yet.

4 weeks out from AC Reconstruction Surgery

 I seem to be better every day, it's slow but it's happening.

I have pretty good range of motion and am getting stronger.  I'm concerned with tearing my shoulder apart by doing too much.  Right now I'm being careful not to stress my shoulder much at all.

Last week, Monday, Wednesday, Friday and Sunday I completed my standard 6X5(5) @105% with mixed results.  While I increased power on most days I had a setback on Friday and rallied on Sunday.  I have one more week with this schedule of workouts then I'll evaluate my situation then.

I started work again today and it was pretty light.  I need to get some calibration work done as well as fixing a few things that have failed in the last 4 week.  Thankfully, most everything is still working well.  I've been given a helper for calibration work in case I need it.  I'll probably use him a bit and then move on by myself.

Post surgery notes 11/19/24

 I really felt like crxp after the surgery but not as bad as I thought I would.

In the week after surgery I was very heavy, about 168lbs.  I was concerned so I started tracking it on November 4th.  At that time I was 165lbs.  My goal was to get back to my pre-surgery weight of ~155lbs.  After that I want to get back to the low 140's.

I started Physical Therapy on November 4th and had better than expected flexibility, it appears the therapist was impressed.  

On November 7th I rode my bike on the trainer for the first time.  I mostly rode sitting up but occasionally I rode 1 handed.

On November 8th I had my post operative check up.  The doctor felt everything was going well.  After the check up I was allowed to stop all of my medications.  There have been a few times that I have taken the Tylenol and Ibuprofen but it was at night to sleep.  The last time I took anything was on November 15th.  I never took any of the Oxycodone.

On November 12th I started some short intervals on the bike with 2x5(5).  My plan was to increase the interval count until I reach 6x5(5).

November 14th I'd done 3x5(5), November 16th 4x5(5).  On November 18th I bypassed the 5x5(5) and went to 6x5(5).  I exceeded the benchmark I did on October 21st.  Most all of the riding has been sitting up or 1 handed.  Now the plan to to hold or increase the power until I am nearer 220 watts if possible.  I expect that somewhere near the beginning of January.  I will then re-evaluate my plan.

As of today I feel the best that I have been.  This has followed the last week of what felt like no progress.

I start work again on November 25th with a 3 day work week.

French Frye reference

 

2015 R3 Wiring diagram

 

Bump to the Thunder Dome

 

Yamaha R3 GP shift with Arashi Rearsets

 

Trailer Picts

 

Loaded with Ramps and 10X10 Tent

The Framework for the Ramps and tent

Typical underside.  I used the existing holes in the framework and 1/4 20 flat-headed bolts to secure boards

Typical screw in boards. 

I cut the front ones to the length of the trailer.  I left the rear ones about 18 inches longer than the framework

When I put the wheelchock in, I had to put it far enough forward to get about 100 lbs on the tongue.  That is why it is so far forward.

The Pitbull TRS is mounted with the bolts it came with but I put some really big fender washers under the nuts on the bottom.

Phone mount

 

 

Tires

 

Cervelo P2

 

Velo Flyer Track Bars

Garmin 955 Solar

 

This is me trying to get away from the juniors during the Madison on Saturday Oct 9th to give my partner a chance to get first place points on the final sprint.  Those kids worked hard and chased me down.

New bars to try out on the Tri or Track bikes

The bars are good quality, they just done fit me the way I want them to.  I used the Profile Design cups which were super-stable, cut 1 inch off the extension but the curve on it just isn't right for me.  I'll find something else to work with and sell these.

Profile Design Arm-cup fits

The horns are a little longer than I expected but I like the gentle upturns

Very little pad drop which is what I'm after.  I may even need to put a spacer in.

Tips of the extensions are very close to what I'm used to

I looks like I can cut off about an inch from the extensions if needed